Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA Digital PA Amplifier, A-2030D-AS
₹ 14,632.00 GST included
Next product
TOA Digital PA Amplifier, A-2060D-AS
₹ 15,694.00 GST included
TOA Mixer Power Amplifier, A-2060
₹ 18,880.00 GST included
4 Versions available: 30 W, 60 W, 120 W or 240 W. User-friendly front Panel allows easy operation. Excellent Frequency response.
3 Electronically balanced microphone inputs, 2 AUX Inputs and Recording Output.
Phantom Power is provided to MIC 1, for Supplying power to a Condenser Microphone. Wide Tone-control adjustment range of Plus or Minus 10dB for both bass and Treble. 100 V / 70 V line or 4 Speaker Outputs. 2-Unit size.
In stock
Description
TOA Mixer Power Amplifier, A-2060 is a High cost-Performance Mixer Power Amplifier suited for Broadcasting Paging or Background Music in Schools, Offices, Shops, Factories, Mosques, Churches and Large Rooms.
Features
- 4 Versions available: 30 W, 60 W, 120 W or 240 W
- User-friendly front Panel allows easy operation
- Excellent Frequency response
- 3 Electronically balanced microphone inputs, 2 AUX Inputs and Recording Output.
- Phantom Power is provided to MIC 1, for Supplying power to a Condenser Microphone
- Wide Tone-control adjustment range of Plus or Minus 10dB for both bass and Treble
- 100 V / 70 V line or 4 Speaker Outputs
- 2-Unit size
Specifications
- Brand : TOA
- Power Source : 220 - 240 V AC, or 24 - 30 V DC
- Rated Output : 60 W
- Power Consumption : 72 W (EN60065), 150 W (AC operation at rated output), 4 A (DC operation at rated output)
- Frequency Response : 50 - 20,000 Hz (Plus or Minus 3 dB)
- Distortion : Less than 1% at 1kHz, 1/3 Rated Power
- Input : Mic 1 : Minus 60 dB, 600, Balanced, Phone jack. AUX 1,2: Minus 20 dB, 10k, Unbalanced, RCA pin jack
- Output Speaker out: Balanced (Floating), High Impedance : 170 (100V), 83 (70V), Low Impedance : 4 (15.5V), Rec Out: 0dB (1V), 600, Unbalanced RCA pin jack
- Signal to Noise Ratio : Over 60dB
- Indicator : POWER, PEAK, SIGNAL
Related products
Close
Vision CP612 Sealed Lead Acid Batteries
Vision CP612 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Exide EP120-12 Powersafe Plus Lead Acid Battery
Exide EP120-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Agni Hunt 14 Zone Fire Alarm Panel
Agni 14 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Exide EP18-12 Powersafe Plus Lead Acid Battery
Exide EP18-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Ravel ABS RE-716MY Green Fire Alarm System
Ravel ABS RE-716MY Green Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Ravel Plastic Yellow MCP Hooter Alarm
Ravel Plastic Yellow MCP Hooter Alarm According to the variegated prerequisites of our customers, we are putting forth a wide combination of Wireless Fire Hooter Cum Flasher. The gave item is very recognized by benefactors attributable to elements like dimensional precision, toughness, erosion, and scraped area safe nature.
Close
Exide EP42-12 Powersafe Plus Lead Acid Battery
Exide EP42-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
