Your list is empty, add products to the list to send a request
Previous product
Back to products
Dahua Addressable Smoke Detector (RI Support), DHI-HY-2301B (MOQ-2Pcs)
₹ 1,534.00 GST included
Next product
Dahua Addressable Manual Call Point, DHI-HY-1200B (MOQ-2Pcs)
₹ 1,534.00 GST included
Dahua Addressable Heat Detector (RI Support), DHI-HY-2311B (MOQ-2Pcs)
₹ 1,534.00 GST included
4W-B Heat Detector, Compatible with remote Indicator. Non-loosening Screws on base Terminal for easy Installation. Contacts material is highly Acid-resistant and Rust-resistant. Designed in accordance with EN54-5 standard.
In stock
Description
Dahua Addressable Heat Detector (RI Support), DHI-HY-2311B is a 4W-B Addressable Heat Detector that Operates
on a Polarity-free Two-wire power supply. It Primarily utilizes a thermal sensing Element to Detect Fires. During the initial stages of a Fire, a significant amount of Heat is Released, causing a Rapid increase in the Surrounding temperature. The Thermal element in the Detector undergoes a Physical change in response to Abnormal Temperature, temperature rate, and temperature differential, converting the temperature signal into an Electrical Signal to trigger an Alarm.
Features
- 4W-B Heat Detector, Compatible with remote Indicator
- Non-loosening Screws on base Terminal for easy Installation
- Contacts material is highly Acid-resistant and Rust-resistant
- Designed in accordance with EN54-5 standard
Specifications
- Brand : Daua
- Surveillance Area : For installation heights below 4 m, the coverage area is 150 m2, For installation heights between 4m and 12m, the coverage area is 80 m2
- Remote Indicator : Support
- Working Principle : Heat detection
- Alarm Mode : Indicator light alarm
- Fixed Detection Threshold : 62 Deg.C plus or minus 3 Deg.C (144 Deg.F plus or minus 37.4 Deg.F)
- Dynamic Detection : 1 to 30 K min-1
- Operating Temperature : minus 10 Deg.C to plus 50 Deg.C
- Dimensions (with base) : 100 mm × 46.3 mm ( 3.94 inch × 1.82 inch)
- Weight (with base) : 102 g (0.22 lb)
- Installation : Ceiling Mount
Related products
Close
Solo 250ml (A10) Smoke Detector Tester Can
Solo 250ml (A10) Smoke Detector Tester Can Approved all over the world, our Solo smoke aerosols (used with the Solo 330/332 dispensers) deliver smoke particles to the detector under test replicating the conditions of smoke from a fire. Our range of smoke aerosols has recently increased to allow continued use of our Solo 330/332 dispensers in full compliance with latest regulations.ÿ
Close
Agni Hunt AHSD-16 Optical Smoke Detector White
Agni Hunt AHSD-16 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Agni Hunt AHSD-12 Optical Smoke Detector White
Agni Hunt AHSD-12 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Mcp-red Ravel Make
Mcp-red Ravel Make Manual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
Agni Hunt AHHD-16 Heat Detector
Agni Hunt AHHD-16 Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Close
Solo 372 Adaptor for Testing ASD Test Points
Solo 372 No Climb ASD Adaptor allows easy alignment with a ASD sampling hole to help provide a functional test of the system. This not only leads to a more professional approach to maintenance, but will offer a simpler and cleaner solution which can enable faster testing at a reduced cost.
Close
Solo (200-001) Universal Detector Removal Tool (HSN 82055990)
Solo (200-001) Universal Detector Removal Tool With the ability to create various size combinations, the universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement.
Close
Qutak QT 180-2L Heat Detector Dual LED
Heat detectors are vital devices for detecting fires and ensuring safety. As the name suggests, the devices sense the temperature of a room or area in order to detect fires. Heat detectors work on a similar principle used by smoke detectors, by tracking the temperature instead of smoke.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
