Your list is empty, add products to the list to send a request
Previous product
Back to products
Dahua Conventional Smoke Detector, DHI-HY-C134 (MOQ-4Pcs)
₹ 767.00 GST included
Dahua Conventonal Heat Detector (RI Support), DHI-HY-C136 (MOQ-3Pcs)
₹ 826.00 GST included
4W-B Smoke Detector, Compatible with remote indicator. Non-loosening Screws on base terminal for easy Installation. Contacts material is highly acid-resistant and Rust-resistant. Designed in accordance with EN54-5 standard.
In stock
Description
Dahua Conventonal Heat Detector (RI Support), DHI-HY-C136 is a 4W-B Non-addressable Heat Detector that operates on a Polarity-free two-wire power supply. It primarily utilizes a Thermal sensing element to detect fires. During the Initial stage of a fire, Significant Heat is released, causing a Rapid increase in the surrounding Temperature. The Thermal sensing element in the Detector undergoes a Physical change, responding to abnormal temperature, rate of temperature change, and temperature differentials. This Transforms the temperature signal into an Electrical signal, Triggering an alarm.
Features
- 4W-B Smoke Detector, Compatible with remote indicator
- Non-loosening Screws on base terminal for easy Installation
- Contacts material is highly acid-resistant and Rust-resistant
- Designed in accordance with EN54-7 standard
Specifications
- Brand : Daua
- Protection Area : For installation heights below 4m, the coverage area is 150 m2, For installation heights between 4m and 12m, the coverage area is 80 m2
- Remote Indicator : Support
- Working Principle : Heat Detection
- Sensor Class : A2R
- Fixed Detection Threshold : 62 Deg.C plus or minus 3 Deg. C
- Dynamic Detection : 1 to 30 K min
- Alarm Mode : Indicator light alarm
- Operating : Voltage DC 24V
- Operating Temperature : Minus 10 Deg.C to Plus 50 Deg.C
- Operating Humidity : Less or Equal to 95 Percent RH (No Condensation)
Related products
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Solo 610-001 Carrying Bag For Detector Test Equipment
The Solo 610-001 is a protective carry bag for use with the No Climb Solo range of fire alarm testing equipment. This product features a large enclosure to store aerosol dispensers, head removal tools, and heat detector testers as well as a side pocket ideal for spare test aerosols.
Close
Mcp-red Ravel Make
Mcp-red Ravel Make Manual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
Solo 423-001 Heat Detector Tester 110/120 Volt
SOLO 423-001 No Climb Heat Detector Tester Mains powered heat detector tester. Available in both 110 / 120 and 220 / 240 volt versions the Solo 423 and 424 are the professionals choice where cables and leads are acceptable.
Close
Ravel RE 326-2SL Photo Electric Smoke Detector
Ravel Conventional Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blends with most ceiling styles to provide an inconspicuous unit.
Close
Solo (424-101) Solo Heat Detector Tester
Solo (424-101) Solo Heat Detector Tester Codes and standards require functional tests to
introduce (simulated) smoke through the detector
vents and into the sensing chamber. The Solo 330
dispenser is the most popular device for achieving
this, benefiting as it does, from a cup big enough
for the great majority of detectors but still small
enough not to be obstructive and unwieldy.
Close
Detect Fire Smoke Detector
Detect Fire Smoke Detector works by detecting light that is reflected off particles from a light beam inside the sensing chamber. When no particles are present in the sensing chamber, the light from the beam does not strike the light detector, indicating all clear
Close
Solo 372 Adaptor for Testing ASD Test Points
Solo 372 No Climb ASD Adaptor allows easy alignment with a ASD sampling hole to help provide a functional test of the system. This not only leads to a more professional approach to maintenance, but will offer a simpler and cleaner solution which can enable faster testing at a reduced cost.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
