Your list is empty, add products to the list to send a request
Previous product
Back to products
GST Communication Card for IPF8 panel, P-9935
₹ 12,921.00 GST included
Next product
GST ModBus Communication Card for IFP8 panel, P-9935ModBus
₹ 19,116.00 GST included
GST Class A RS485 Network Card for IFP8 panel, P-9945A
₹ 15,222.00 GST included
Two Photoelectric Isolation RS485 Interfaces. Suitable for Ring Network. Card Shouldn’t be Inserted and Removed when it is Energized.
In stock
Description
GST Class A RS485 Network Card for IFP8 panel, P-9945A is an Optional Card for GST-IFP8 Control Panel, Providing Two Photoelectric Isolation RS485 Interfaces for Ring Network. This Card shouldn’t be Inserted and Removed when it is Energized. Network OK is Displayed when the Panel is
Switched on. That Means Successful Registration.
Features
- Two Photoelectric Isolation RS485 Interfaces
- Suitable for Ring Network
- Card Shouldn’t be Inserted and Removed when it is Energized
Specifications
- Brand : GST
- Comm. Interface : Two RS485 Interface
- Comm. Distance : The Distance between Two Neighbor Nodes is less than 1200m
- Network Capacity : Maximum 32 GST series control panels for networking
- Transmission Medium : 1.0 mm2 or above twisted pair, shielded twisted pair is recommended
- Baud Rate : 4800bps
- Ambient Temperature : 0 Deg. C to Plus 40 Deg. C
- Relative Humidity : Less than or Equal to 95 Percent, Non condensing
Related products
Close
Edwards CAB21B Backbox for EST4 Panel
The Edwards CAB21D Backbox is a heavy-duty enclosure designed specifically for housing modules within the Edwards EST4 Fire Alarm Panel
Close
Simplex – Suppression Release Panel Model no : 4004-9302 4004R
The Simplex 4004R Suppression Release Panel is a dedicated fire suppression releasing control panel designed for automatic extinguishing, deluge, and
Close
EDWARDS – EST3 to BMS Communications Bridges – Model FSB-PC2 and FSB-PCLW
The EST3 Communication Bridges are ancillary devices that
provide protocol translation between EST3 serial data and the
serial or Ethernet input of an external device controller. Signal
flow is typically one way — from the EST3 network to the building
automation system.
Two communication bridges are available for use with EST3
systems. Each comes complete with the EST3 driver necessary to
communicate over a single supported protocol.
The FSB-PC2 is a multi-protocol bridge that converts the EST3
External Communications Protocol (ECP) to any one of several
supported protocols including Modbus RTU, BACnet MSTP and
Metasys N2. It operates over RS-232 or RS-485 serial communications or Ethernet (10/100 Base-T).
The FSB-PCLW is a single-protocol bridge that converts the
EST3 External Communications Protocol (ECP) to Lon Works only.
Close
GST Dual Loop Card for IFP8 Panel, LCIFP8
Dual Loop Card. System Expansion Card. Adds Two Additional Loops.
Close
GST Communication Card for GST200N Panel, P-9930
Standard RS232 and USB interfaces. Connecting GST Graphic Monitor Center
and GST Defining Tool. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
GST Single Loop Card for GST200N panel, LC200
Connecting with Loop Devices. Add one Loop to connect 242 Addressable Devices. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
Esser – Loop Card Model no : 804382.D0
The Esser 804382.D0 Loop Card is a high-performance expansion module designed to extend the capability of Esser fire alarm control
Close
Back box for telephone jack model no 6833-4
The 6833-4 Telephone Jack is a high-quality firefighter telephone receptacle designed for use in fire alarm and emergency communication systems. It
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
