Your list is empty, add products to the list to send a request
Previous product
Back to products
GST Communication Card for IPF8 panel, P-9935
₹ 12,921.00 GST included
Next product
GST ModBus Communication Card for IFP8 panel, P-9935ModBus
₹ 19,116.00 GST included
GST Class A RS485 Network Card for IFP8 panel, P-9945A
₹ 15,222.00 GST included
Two Photoelectric Isolation RS485 Interfaces. Suitable for Ring Network. Card Shouldn’t be Inserted and Removed when it is Energized.
In stock
Description
GST Class A RS485 Network Card for IFP8 panel, P-9945A is an Optional Card for GST-IFP8 Control Panel, Providing Two Photoelectric Isolation RS485 Interfaces for Ring Network. This Card shouldn’t be Inserted and Removed when it is Energized. Network OK is Displayed when the Panel is
Switched on. That Means Successful Registration.
Features
- Two Photoelectric Isolation RS485 Interfaces
- Suitable for Ring Network
- Card Shouldn’t be Inserted and Removed when it is Energized
Specifications
- Brand : GST
- Comm. Interface : Two RS485 Interface
- Comm. Distance : The Distance between Two Neighbor Nodes is less than 1200m
- Network Capacity : Maximum 32 GST series control panels for networking
- Transmission Medium : 1.0 mm2 or above twisted pair, shielded twisted pair is recommended
- Baud Rate : 4800bps
- Ambient Temperature : 0 Deg. C to Plus 40 Deg. C
- Relative Humidity : Less than or Equal to 95 Percent, Non condensing
Related products
Close
Esser – Loop Card Model no : 804382.D0
The Esser 804382.D0 Loop Card is a high-performance expansion module designed to extend the capability of Esser fire alarm control
Close
GST ModBus Communication Card for GST200N panel, P-9930ModBus
Comply with Modbus RTU Communication
Protocol. Standard RS232 Interface, used for System Integration of the Third party. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
Esser – Base for Detectors Model no : 805590
The Esser 805590 Detector Base is a high-quality mounting accessory designed for seamless integration with IQ8Quad and ES Detect series
Close
Edwards Weatherproof Strobe Model no : WG4RF
The Edwards WG4RF Weatherproof Strobe is a high-performance visual notification appliance designed for fire alarm and emergency signaling systems in
Close
GST Communication Card for IPF8 panel, P-9935
Complying with Modbus RTU Communication
Protocol. Standard RS232 interface, used for System Integration of the Third Party. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
GST ModBus Communication Card for IFP8 panel, P-9935ModBus
Complying with Modbus RTU Communication
Protocol. Standard RS232 interface, used for System Integration of the Third Party. Card Shouldn’t be Inserted and Removed when it is Energized. Default DIP Code is 6.
Close
EDWARDS – EST3 to BMS Communications Bridges – Model FSB-PC2 and FSB-PCLW
The EST3 Communication Bridges are ancillary devices that
provide protocol translation between EST3 serial data and the
serial or Ethernet input of an external device controller. Signal
flow is typically one way — from the EST3 network to the building
automation system.
Two communication bridges are available for use with EST3
systems. Each comes complete with the EST3 driver necessary to
communicate over a single supported protocol.
The FSB-PC2 is a multi-protocol bridge that converts the EST3
External Communications Protocol (ECP) to any one of several
supported protocols including Modbus RTU, BACnet MSTP and
Metasys N2. It operates over RS-232 or RS-485 serial communications or Ethernet (10/100 Base-T).
The FSB-PCLW is a single-protocol bridge that converts the
EST3 External Communications Protocol (ECP) to Lon Works only.
Close
Edwards Weatherproof MCP Model no: MPRS1-D45W-GE
The Edwards MPRS1-D45W-GE Weatherproof Manual Call Point (MCP) is a robust and reliable fire alarm initiating device designed for outdoor
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
