Your list is empty, add products to the list to send a request
Previous product
Back to products
GST ModBus Communication Card for GST200N panel, P-9930ModBus
₹ 19,116.00 GST included
Next product
GST Communication Card for IPF8 panel, P-9935
₹ 12,921.00 GST included
GST Dual Loop Card for IFP8 Panel, LCIFP8
₹ 38,350.00 GST included
Dual Loop Card. System Expansion Card. Adds Two Additional Loops.
In stock
Description
GST Dual Loop Card for IFP8 Panel, LCIFP8 is a System Expansion Card for GST-IFP8 panel, adds Two Additional Loops.
Features
- Dual Loop Card
- System Expansion Card
- Adds Two Additional Loops
Specifications
- Brand : GST
- Operation voltage : 24VDC
- Operation current : 600mA
- Capacity : 484 addresses
- Loop Connection : Class A
- Cable Requirement : Minimum 1.0mm2 Fire Cable
- Installation : Insert into typical slot of GST-IFP8
Related products
Close
GST Class A RS485 Network Card for IFP8 panel, P-9945A
Two Photoelectric Isolation RS485 Interfaces. Suitable for Ring Network. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
GST Hand Held Programmer – Latest version, P-9920
Hand held Unit, Small Size. Easy to Carry and Operate. Register On-line Devices. Identify Device Type and Report Repeat Address on same Loop. Test Device functionality. Set and Read Device's Address and Sensitivity. Adopt 128 x 128 Dot Matrix LCD Screen with Backlight Display. Low Power Consumption mode, automatic shutdown. Low Battery Indication.
Close
Esser – Base for Detectors Model no : 805590
The Esser 805590 Detector Base is a high-quality mounting accessory designed for seamless integration with IQ8Quad and ES Detect series
Close
GST ModBus Communication Card for GST200N panel, P-9930ModBus
Comply with Modbus RTU Communication
Protocol. Standard RS232 Interface, used for System Integration of the Third party. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
EDWARDS – EST3 to BMS Communications Bridges – Model FSB-PC2 and FSB-PCLW
The EST3 Communication Bridges are ancillary devices that
provide protocol translation between EST3 serial data and the
serial or Ethernet input of an external device controller. Signal
flow is typically one way — from the EST3 network to the building
automation system.
Two communication bridges are available for use with EST3
systems. Each comes complete with the EST3 driver necessary to
communicate over a single supported protocol.
The FSB-PC2 is a multi-protocol bridge that converts the EST3
External Communications Protocol (ECP) to any one of several
supported protocols including Modbus RTU, BACnet MSTP and
Metasys N2. It operates over RS-232 or RS-485 serial communications or Ethernet (10/100 Base-T).
The FSB-PCLW is a single-protocol bridge that converts the
EST3 External Communications Protocol (ECP) to Lon Works only.
Close
GST Communication Card for IPF8 panel, P-9935
Complying with Modbus RTU Communication
Protocol. Standard RS232 interface, used for System Integration of the Third Party. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
GST Class A RS485 Network Card for GST200N panel & NRP00 Repeater Panel, P-9940A
Two Photoelectric Isolation RS485 Interfaces. Suitable for Ring Network. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
Edwards Weatherproof MCP Model no: MPRS1-D45W-GE
The Edwards MPRS1-D45W-GE Weatherproof Manual Call Point (MCP) is a robust and reliable fire alarm initiating device designed for outdoor
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
