Your list is empty, add products to the list to send a request
Description
RA-2000 remote annunciators are used to operate and program Silent Knight® Farenhyt™ Series fire alarm control panels (FACPs). They connect to the control panel via the RS-485 SBus. When the system is in normal operation and has AC power, the power LED is lit and all other LEDs are off. The other LEDs turn on as alarms, supervisories, troubles, and system silence. These annunciators can be surface- or flush-mounted and are available in red and gray colors.
Features
- 160-character backlit LCD display (4 lines with 40 characters each)
- Operation and appearance is identical to the FACPs built-in annunciator
- Tactile/audible feedback when key is pressed on annunciator
- RS-485 SBus interface to panel
- Initiate and end fire drills with a single key
- Displays the status and event history of all the panels assigned in a network
- Annunciators will sound the highest priority tone from the panel it is assigned to
- On-board piezo sounder audibly indicates alarms, troubles, and supervisories
Specifications
- Operating Temperature: 0°C to 49°C (32°F to 120°F)
- Humidity Range: 0% to 93% relative humidity (non-condensing)
- Weight: Approximately 2 lbs (0.91 kg)
- Wire Length Capacity: Supports wiring lengths up to 6,000 feet (1,828 meters) from the control panel
Related products
Close
Ravel 4 Zone Fire Alarm Panel
Ravel 4 Zone Fire Alarm Panel microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted.
Close
Edward 3-LCDANN + RLCM Repeater Panel
Edward 3-LCDANN + RLCM Repeater Panel supports a full range of annunciator options for Mass Notification/Emergency Communication (MNEC), Life Safety and other purposes. Annunciator cabinets are constructed from 16 gauge cold rolled steel. The gray textured enamel finish of the annunciators complements any decor.
Close
Edward EST3-CAB5 4Loop Fire Alarm Panel Expendable upto 4Loop
Edward EST3-CAB5 4Loop Fire Alarm Panel Expendable upto 4Loop is a robust modular control panel that unifies fire alarm, smoke control, security and mass notification systems. The EST3 fire alarm system is a leader in the field with the ability to have network panels with overall length in excess of 300,000 ft. Making the EST3 an ideal solution for any size facility.
Close
Safe On 16 Zone Conventional Fire Alarm Panel With LED Display
Safe On 16 Zone Conventional Fire Alarm Panel With LED Display is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection. RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries.
Close
On Spotfire 8 Zone Fire Alarm Panel
On Spotfire 8 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire detection, for small installation which is 2 zone.
Close
Safe On 10 Zone Conventional Fire Alarm Panel With LED Display
Safe On 10 Zone Conventional Fire Alarm Panel With LED Display is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection. RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries.
Close
Freeze Fire 6 Zone Fire Alarm Panel
Freeze Fire 6 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire detection, for small installation which is 2 zone.
Close
Edward 3-SDDC2 Dual Loop Card
Edward 3-SDDC2 Dual Loop Card Signature Driver Controller modules provide an intelligent interface between the 3-CPU3 module and Signature Series devices. Each module contains its own microprocessor used to coordinate, process and interpret information received from and sent to Signature devices.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.