Your list is empty, add products to the list to send a request
Previous product
Back to products
Simplex 4099-9701 Addressable Manual Call Point
₹ 3,186.00 GST included
Next product
Simplex 4100-3103 Isolator Module for MAPNET
₹ 50,173.60 GST included
- The minimum required quantity for GST Conventional Photoelectric Smoke Detector, DC-9102E+DB-01 (MOQ-3Pcs) (FSIN0000362527) is 3.
Simplex 4098-9714 photoelectric Smoke Detector
₹ 3,422.00 GST included
The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow.
Description
TrueAlarm photoelectric sensors use a stable, pulsed LED light source and a silicon photodiode receiver to deliver consistent and accurate low power smoke sensing. Three user selectable sensitivities for special applications are available for each individual sensor, 0.2%, 0.5%, and 1% per foot. Standard sensitivity is 1.25% to 3.1% per foot. The fire alarm control panel runs an algorithm that can vary the sensitivity for normal applications between 1.25% and 3.1% per foot.
Note: Fixed sensitivity settings higher than 1.0% per foot are not UL268 7th Edition compliant.
The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow.
Features
- Sealed against rear air flow entry
- Interchangeable mounting
- EMI/RFI shielded electronics
- Photoelectric technology sensing
- 360° smoke entry for optimum response
- Built-in insect screens
- Protocol IDNet, MAPNET II
- Voltage 24 VDC
- Voltage Range 18 – 32 VDC
Specifications
- Brand Simplex
- Unit of Measurement EA (Each)
- Type Detector
- Style Plug-In
- Detectable Medium Smoke
- Detection Method Photoelectric
- Programming Set via Base
Related products
Close
Simplex 4098-9714 TrueAlarm Photoelectric Smoke Detector with 4098-9793 Isolator Sensor Base
The Simplex 4098-9714 is a state-of-the-art, addressable ceiling-mounted smoke detector designed for early and accurate detection of smoke in commercial and industrial environments. Paired with the 4098-9789 base, this device provides built-in fault isolation, ensuring system integrity and continued operation during wiring faults. Ideal for modern fire alarm systems, this detector enhances protection with smart sensing and communication capabilities.
Close
GST Conventional Photoelectric Smoke Detector, DC-9102E+DB-01 (MOQ-3Pcs)
LED for 360 Deg. Vision. Featuring Magnetic Test. Remote Indicator Output available. Removable Innovative sensing chamber. 2-Level Sensitivities. Magnetic Test. LPCB Approved.
Close
Dahua Standalone Smoke Alarm, (5-year Replaceable Battery), DHI-HY-SA13A (MOQ-3Pcs)
Test and Silence Features in one Single Button. Low Quiescent current consumption. Loud sound output over 85 dB(A) at 3 meters. Surface-mount Device (SMD) Circuit Board Design. Low battery warning signal. Replaceable battery. Easy installation.
Close
Apollo – XP95 I.S. Optical Smoke Detector – Model 55000-640APO
The Apollo XP95 I.S. Optical Smoke Detector (Model 55000-640APO) is an Intrinsically Safe (I.S.) addressable smoke detector designed for use in hazardous and explosive environments where flammable gases, vapours, or dusts may be present. Using advanced optical sensing technology, it provides early warning of smouldering fires by detecting visible smoke particles with high accuracy.
Close
Honeywell – Photoelectric Smoke Detector – Model: IDP-PHOTO-R-W
The Honeywell IDP-PHOTO-R-W is a highly accurate, addressable photoelectric smoke detector designed to provide early warning of smoldering fires in commercial and industrial environments. Featuring remote test capability, this white, low-profile detector integrates seamlessly with Honeywell’s fire alarm systems using the System Sensor protocol.
Close
Dahua Addressable Smoke Detector (Without RI Support), DHI-HY-1301B (MOQ-2Pcs)
Convenient wiring: Two-wire, polarity-free. Reliable communication: Built-in Microprocessor, Stable performance. Ultra-low Power Consumption: Ultra-low monitoring Current and Alarm current. Detection performance: Accurate smoke detection by sensitive sensor. Designed in accordance with EN54-7 Standard.
Close
Honeywell – Photoelectric Smoke / Thermal Multi-Criteria Fire Detectors – Model: HM-PTSE-AP + B5-1
Enhance your fire safety system with the Honeywell HM-PTSE-AP + B5-1 Multi-Criteria Fire Detector, a state-of-the-art solution combining both photoelectric smoke sensing and thermal detection in a single device. Designed to detect a wide range of fire types—including slow smoldering fires and fast-flaming fires—this intelligent detector delivers faster, more accurate fire identification while reducing the risk of false alarms.
Close
Dahua Conventional Multi Sensor Detector (Without RI Support), DHI-HY-C135 (MOQ-3Pcs)
3W-B Multi-sensor Smoke and Heat Detector with Two-wire and Polarity-free power supply. Reliable communication: Built-in microprocessor, Stable performance. Ultra-low power consumption: Ultra-low monitoring current and Alarm Current. High-performance sensor Featuring a split-spectrum Optical Smoke Detector and a Sensitive Thermistor. Designed in accordance with EN54-5 and EN54-7 standards.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.