Your list is empty, add products to the list to send a request
Previous product
Back to products
Dahua Addressable Smoke Detector (RI Support), DHI-HY-2301B (MOQ-2Pcs)
₹ 1,534.00 GST included
Next product
Dahua Addressable Manual Call Point, DHI-HY-1200B (MOQ-2Pcs)
₹ 1,534.00 GST included
Dahua Addressable Heat Detector (RI Support), DHI-HY-2311B (MOQ-2Pcs)
₹ 1,534.00 GST included
4W-B Heat Detector, Compatible with remote Indicator. Non-loosening Screws on base Terminal for easy Installation. Contacts material is highly Acid-resistant and Rust-resistant. Designed in accordance with EN54-5 standard.
In stock
Description
Dahua Addressable Heat Detector (RI Support), DHI-HY-2311B is a 4W-B Addressable Heat Detector that Operates
on a Polarity-free Two-wire power supply. It Primarily utilizes a thermal sensing Element to Detect Fires. During the initial stages of a Fire, a significant amount of Heat is Released, causing a Rapid increase in the Surrounding temperature. The Thermal element in the Detector undergoes a Physical change in response to Abnormal Temperature, temperature rate, and temperature differential, converting the temperature signal into an Electrical Signal to trigger an Alarm.
Features
- 4W-B Heat Detector, Compatible with remote Indicator
- Non-loosening Screws on base Terminal for easy Installation
- Contacts material is highly Acid-resistant and Rust-resistant
- Designed in accordance with EN54-5 standard
Specifications
- Brand : Daua
- Surveillance Area : For installation heights below 4 m, the coverage area is 150 m2, For installation heights between 4m and 12m, the coverage area is 80 m2
- Remote Indicator : Support
- Working Principle : Heat detection
- Alarm Mode : Indicator light alarm
- Fixed Detection Threshold : 62 Deg.C plus or minus 3 Deg.C (144 Deg.F plus or minus 37.4 Deg.F)
- Dynamic Detection : 1 to 30 K min-1
- Operating Temperature : minus 10 Deg.C to plus 50 Deg.C
- Dimensions (with base) : 100 mm × 46.3 mm ( 3.94 inch × 1.82 inch)
- Weight (with base) : 102 g (0.22 lb)
- Installation : Ceiling Mount
Related products
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Solo 250ml (A10) Smoke Detector Tester Can
Solo 250ml (A10) Smoke Detector Tester Can Approved all over the world, our Solo smoke aerosols (used with the Solo 330/332 dispensers) deliver smoke particles to the detector under test replicating the conditions of smoke from a fire. Our range of smoke aerosols has recently increased to allow continued use of our Solo 330/332 dispensers in full compliance with latest regulations.ÿ
Close
Agni Hunt AHSD-12 Optical Smoke Detector White
Agni Hunt AHSD-12 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Solo 110-001 Fiberglass 4 Section Telescopic Pole 1.75m
Solo 101 Telescopic Pole 1.5m which is extremely lightweight, quick and easy to extend to any height. Poles are subjected to rigorous conductivity testing to ensure the integrity of the insulating materials. Equipment in contact with live electrical components make it vital for the insulating materials to be of the highest quality. The Solo 100/101/108 will stand up to the rigors of everyday field-testing and isolate the user from danger.
Close
Solo (101-001) 1.13mtr Fiberglass Extension Pole(HSN CODE 90279090)
Solo (101-001) 1.3mtr Fiberglass Extension Pole Expendable Upto An essential part of the Solo detector testing range, the Solo 100 telescopic access pole offer safe access to detectors installed at height. Without the need for ladders, the telescopic access pole ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005.
Close
Solo (200-001) Universal Detector Removal Tool (HSN 82055990)
Solo (200-001) Universal Detector Removal Tool With the ability to create various size combinations, the universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement.
Close
TX7130R Conventional Reflective Beam Detector
TX7130R Conventional Reflective Beam Detector has built in Laser beam pointing and Digital guide display for a real user-friendly alignment method. The Laser beam pointing accurately point the exact location where to mount mirror and with additional digital guide display allows to monitor and guide on the actual light intensity between the mirror and detector which cannot be seen by our naked eye making it more easy and convenient in alignment commissioning.
Close
RE317DHL Heat Detector-ravel Make
Heat Detector-ravel Make Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
