Your list is empty, add products to the list to send a request
Close
GST Conventional Ultraviolet Flame Detector, C-9104 + DZ-03
Ultraviolet Sensor that Detects the UV rays emitted by a Flame. Aesthetically pleasing low Profile Design. Dust-proof, Damp-proof and Corrosion-proof.
Close
GST GMC Graphic Monitor Center, GST-GMC3.0
Color Graphic Control and Display System. Providing a Complete Window on the Fire Detection Systems and Ancillary Equipment. One Local Operator and Maximum 8 Remote users. Multi-level Password Control for Convenient System management. PC not Included.
Close
GST Digital Zone Monitor Module, DI-9319E
Cable checking for Inputs and Outputs. Normally-open (NO) or Normally-close (NC) output Automatically follows Input Port to Change State. Electronically addressing. Addresses can be Modified in field. DIN-Rail Mounted or Wall mounted. Standard: EN 54-18:2005.
Close
GST Addressable Sounder, I-9404
Providing 16 tones. Loop Powered or External 24V Powered. Power-saving Consumption Mode and Normal consumption mode (factory default). Single/ Dual address Programmable. Standard: EN 54-3.
Close
GST Addressable Reflective Beam Detector, DI-9105E
Loop Powered. Optical Pathway 5-100 Mtrs. Combination of the Emitting and Receiving part Makes mounting easy and optical pathway accurate. Built-in Microprocessor Enables intelligent judgment about fire alarm and fault. East alignment and commisioning via supporting of onboard laser pointer and digital signal intensity indication. Self-diagnostic function can monitor the internal fault. Electronically addressed by programmer. Four sensitivity levels can be set in field. LPCB Approved.
Close
GST Passive Remote Indicator, C-9314P (MOQ-4Pcs)
LED Indication Available. Built-in Current-limiting Resistor. Controlled by a Detector.
Close
GST Isolator Base, DC-9504E (MOQ-2Pcs)
Polarity-sensitive External Connections. Input and Output can be used Inversely without Direction. Delayed Power-up to Output end Devices. Avoids strong Transient Current the Load is Heavy. Applicable to all kinds of Loop Fire Alarm Systems. Suitable for A and Class B.
Close
GST Intelligent Rate of Rise and Fixed Temperature Heat Detector, DI-9103E (MOQ-2Pcs)
Designed to Comply with EN 54-5 Standard. Remote Indicator output available. Electronically Addressed in field. Polling LED can be set to close. Fire LED allows 360 Deg. Viewing. 3 classes Programmable. Reed switch Testing. Self-diagnostic.
Close
GST Hand Held Programmer – Latest version, P-9920
Hand held Unit, Small Size. Easy to Carry and Operate. Register On-line Devices. Identify Device Type and Report Repeat Address on same Loop. Test Device functionality. Set and Read Device's Address and Sensitivity. Adopt 128 x 128 Dot Matrix LCD Screen with Backlight Display. Low Power Consumption mode, automatic shutdown. Low Battery Indication.
Close
GST Hand Held Programmer, P-9910B
Hand held Unit, Portable Tool. Convenience Operation. Quadruple Digit Alphanumeric LCD Display. Low-consumption Hibernation and Power Saving Function. E-Low Battery Indication. WEEE & RoHS Compliant.
Close
GST Loop Relay Module, P-9903
Digital Communication with Fire Alarm Control Panel (FACP) ensures Immunity to
Electromagnetic Interference and Reliable
Operation. Optoisolated Output Signal, resistant to Industrial Frequency Interference. Optocoupler Isolation Technology is used between the Transmitter and Receiver Circuit.
Close
GST ModBus Communication Card for IFP8 panel, P-9935ModBus
Complying with Modbus RTU Communication
Protocol. Standard RS232 interface, used for System Integration of the Third Party. Card Shouldn’t be Inserted and Removed when it is Energized. Default DIP Code is 6.
Close
GST Class A RS485 Network Card for IFP8 panel, P-9945A
Two Photoelectric Isolation RS485 Interfaces. Suitable for Ring Network. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
GST Communication Card for IPF8 panel, P-9935
Complying with Modbus RTU Communication
Protocol. Standard RS232 interface, used for System Integration of the Third Party. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
GST Dual Loop Card for IFP8 Panel, LCIFP8
Dual Loop Card. System Expansion Card. Adds Two Additional Loops.
Close
GST ModBus Communication Card for GST200N panel, P-9930ModBus
Comply with Modbus RTU Communication
Protocol. Standard RS232 Interface, used for System Integration of the Third party. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
GST Class A RS485 Network Card for GST200N panel & NRP00 Repeater Panel, P-9940A
Two Photoelectric Isolation RS485 Interfaces. Suitable for Ring Network. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
GST Communication Card for GST200N Panel, P-9930
Standard RS232 and USB interfaces. Connecting GST Graphic Monitor Center
and GST Defining Tool. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
GST Single Loop Card for GST200N panel, LC200
Connecting with Loop Devices. Add one Loop to connect 242 Addressable Devices. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
GST Intelligent Fire Alarm Control Panel, GST200N-1
Max. 30 Zones. Each zone has its own Alarm and Fault/ Disable Indicator and a Label. Single Loop panel capacity 235 Addressable Devices. 2-loop Panel capacity 477 Addressable Devices. Compatible with GST Intelligent and Digital products. 8X18 Characters LCD screen. 15 LEDs to Display Important Information. Non-Volatile memory ensures No loss of Data even if Power supply is Accidentally Removed. Wide range Power Supply. Sounder Strobe output provides 0.5A24V Load, Compatible with GST Conventional Sounders. RS232 Interface enables Communication with PC.
