Shop

Hard Buttons and Knobs for easy Broadcast operations. 4.3 inch LCD screen displays operation information, fault information, equipment Information. ANC Noise Detection Function. Equipment and Speaker line have Fault Detection.

Low loss Modular Class-D Amplifier. Modules to be Mounted in the Frame Units. Power level: 150 W. Can Easily be Removed or Replaced simply by Unplugging them, no need for Special Tools. Dust filter, easy to clean. 100 V Output without transformer resulting in light-weight units. Fuse easily accessible from rear.

Master, 1 Unit per System. 360 W Power Output. 8 Remote Microphones (4x general, 4x emergency). EN54: max. 2 x emergency or 4 x general plus 1 x emergency). 6 Zones, for BGM selectable with volume control from the Front Panel. Built-in High Quality Electronic voice store for 2 emergency and 6 general messages.

System management amplifier can be expanded by connecting up to 9 extension amplifiers. 360 W rated output. 6 Speaker line outputs. 8 control inputs and 8 control outputs for general purpose. 6 Control inputs for emergency purpose and 3 control outputs for status information. Connection to system management amplifier via VM Link.

Speaker line Failure can be detected with Greater Accuracy. Specifically Designed for 100 V Speaker Line.

Programmable System Management Amplifier. 120 W or 240 W. 5 Switchable High Impedance Speaker Zones with adjustable Attenuators. 9 Units can be combined to increase the Output Power and Number of Zones. 4 Input Channels come with Volume and Bass/ Treble Control on the front panel. Both BGM inputs with level Pre-adjustment. The routing to the zones of the 3 microphone/ line level inputs and the telephone paging input can be pre-set. Emergency Power input, remote power control, 7 built-in chimes etc.

For Unbalanced, line level sources such as tuners, cassette decks, CD players, computer sound cards, jukeboxes, mixers and satellite receivers. For Adjacent Sources (less than 15ft from the host unit). Compressor function prevents overload and distortion. Master Compressor Mode. Connector: Removable Terminal Block.

For unbalanced, line level sources such astuners, cassette decks, CD players, computer sound cards, jukeboxes, mixers and satellite receivers. Use for adjacent sources (less than 15ft from the host unit). Allows remote control of input signal using an external 10kohm Linear-taper Potentiometer. Master Remote Volume mode. Connector: Screw Terminal.

For Unbalanced, line level Sources such as Tuners, Cassette Decks, CD players, Computer sound cards, Jukeboxes, Mixers and Satellite Receivers. Use for Adjacent Sources (less than 15ft from the host unit) - Responds To Mute Bus Activation, via Mute SEND module or switch-closure. Responds To Both Mute Bus #1 And Mute Bus #2 By Default (cut jumper(s) to disconnect individual mute bus). Adjustable Mute Depth Provides Ducking Rather Than Full Muting. Connector: Removable Terminal Block.

For Unbalanced, line level Sources such as Tuners, Cassette Decks, CD players, Computer sound cards, Jukeboxes, Mixers and Satellite Receivers. Use for Adjacent Sources (less than 15ft from the host unit). High and low cut filters for tone control. Connectors: Dual RCA Jack w/ passive summing.